Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Yeovil

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Yeovil

We install in Yeovil and the surrounding areas.

Backed by over two decades of combined expertise, our team works as a close-knit group, driven by a shared passion for high-quality workmanship. This approach has helped shape our strong reputation. We take pride in delivering a five-star service, and your satisfaction remains at the heart of everything we do.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

Air source heat pumps are energy-efficient systems that capture heat from the outside air to supply heating and hot water. It offers a low-carbon alternative to traditional gas or oil heating systems.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. The system remains efficient even in colder conditions.

Heating and hot water explained

It provides heating through radiators or underfloor systems, along with hot water storage. This ensures a steady and reliable supply of heating and hot water.

Efficient heating and cooling

Air source heat pumps are highly efficient, producing more energy than they consume. Certain models can offer cooling as well as heating, giving you greater control over indoor temperatures.

Types of Air Source Heat Pumps

Air source heat pumps come in a range of system types designed to suit different homes and heating needs. The most common options include air to water, air to air, and hybrid systems.

Air to water heat pumps

Air to water systems deliver heat to your home through water-based systems such as radiators and underfloor heating. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. They are often used where both heating and cooling are required within the same system.

Hybrid air to water systems

These systems integrate a heat pump with an existing boiler for a balanced approach to heating. This setup helps maintain efficiency while ensuring consistent performance during colder periods.

Monobloc vs split systems

There are two main configurations: monobloc systems and split systems, each with different installation requirements. A monobloc system is contained within a single unit, while a split system separates key components between indoor and outdoor units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Installing an air source heat pump offers a more energy-efficient and low-carbon way to heat your home. They are designed to deliver consistent heating, lower running costs, and long-term performance.

Lower energy bills

They operate at high efficiency levels, producing more heat energy than the electricity they consume. This can help lower your energy bills compared to traditional heating systems.

Reduced carbon emissions

These systems offer a lower-carbon alternative to traditional fossil fuel heating. They make use of renewable heat energy, helping to lower your carbon footprint.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. Ongoing maintenance helps ensure they continue to run efficiently year after year.

Reliable hot water supply

They can meet your household’s hot water demands efficiently. When paired with a suitable cylinder, they ensure hot water is available when you need it.

How Much Does an Air Source Heat Pump Cost in Yeovil?

Average installation costs in Yeovil

Most air source heat pump installations fall between £7,000 and £14,000, depending on the size and complexity of the system. Available grants may help lower the overall installation cost.

What affects the price of a heat pump?

Several factors influence the cost of installing a heat pump, including property size, insulation, and system design. Additional work such as upgrading radiators, pipework, or hot water cylinders can also impact the overall price.

Running costs and efficiency

These systems operate at high efficiency levels, delivering more heat output than the energy they use. Annual running costs are generally between £800 and £1,200, depending on your home and energy usage.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Modern air source heat pumps run at low noise levels, making them ideal for home use. Any noise generated is usually low and blends into the background.

02. Do you still need a boiler?

In most cases, an air source heat pump can fully replace a traditional boiler. However, some properties may use a hybrid system alongside a boiler during colder periods.

Day to day heating and hot water use

These systems operate efficiently by maintaining a steady level of heat throughout your home rather than switching on and off. This approach helps improve efficiency and avoids sudden changes in temperature.

Hot water is produced and stored for use when required, providing a reliable supply. It is designed to comfortably meet the hot water needs of most households.

Heat Pump Guarantees and Maintenance

Air source heat pumps are designed for long-term reliability, with warranties and maintenance helping to protect your investment. Ongoing servicing helps maintain efficiency and reduce the risk of issues.

Manufacturer warranties

Most air source heat pumps come with manufacturer warranties that cover key components for added peace of mind. The length and level of cover can vary depending on the brand and system installed.

Expected system lifespan

With the right care, air source heat pumps can provide reliable performance over the long term. It is common for systems to operate efficiently for 15 to 20 years or longer.

Ongoing maintenance requirements

Regular checks help ensure the system continues to operate efficiently. This may include inspections, cleaning components, and checking system pressure.

Recent Heat Pump Installations in Yeovil

Heat pump installations have increased significantly in recent years, with more homeowners choosing low-carbon heating solutions. The increase reflects wider efforts to reduce carbon emissions and improve energy performance in homes.

Residential heat pump installations

Air source heat pumps are widely installed in residential settings due to their practicality and efficiency. They are designed to suit different property types and can often be installed with minimal disruption.

Yeovil and South West projects

We’ve completed a range of recent air source heat pump installations across Yeovil and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Yeovil

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are generally not expensive to run, thanks to their high efficiency. Their efficiency means they can deliver more heat output for less energy input.

02. How long does installation take?

Installation typically takes between two to five days, depending on the complexity of the project. The exact duration will depend on the size of the system and any additional requirements.

03.Are heat pumps suitable for my home?

Air source heat pumps are suitable for a wide range of properties, including both new builds and existing homes. An initial survey will confirm whether your home is suitable and what system is required.

04. What maintenance is required?

Routine maintenance helps ensure the system continues to operate at its best. This typically includes inspections, cleaning components, and checking system performance.