Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Swindon

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Swindon

We install in Swindon and the surrounding areas.

Backed by over two decades of combined expertise, our team functions as a well-coordinated unit, committed to delivering exceptional service standards. It’s this mindset that underpins our continued success. We aim to exceed five-star expectations on every project, and your satisfaction remains at the centre of our approach.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is an energy-efficient system that extracts heat from the outside air to heat your home and hot water. This makes it a more sustainable alternative to traditional gas or oil heating.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. They are designed to operate efficiently all year round, including during colder weather.

Heating and hot water explained

The system distributes heat through radiators, underfloor heating, or a hot water cylinder. This ensures a steady and reliable supply of heating and hot water.

Efficient heating and cooling

These systems are designed for high efficiency, delivering more heat energy than the electricity they use. Certain models can offer cooling as well as heating, giving you greater control over indoor temperatures.

Types of Air Source Heat Pumps

Air source heat pumps come in a range of system types designed to suit different homes and heating needs. The most common options include air to water, air to air, and hybrid systems.

Air to water heat pumps

These systems use heat from the air to warm water for your heating system and hot water cylinder. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. In addition to heating, they can offer cooling, making them a versatile solution.

Hybrid air to water systems

A hybrid air to water system works alongside a boiler to deliver efficient and reliable heating. This setup helps maintain efficiency while ensuring consistent performance during colder periods.

Monobloc vs split systems

Air source heat pumps are typically available as monobloc or split systems, depending on how the components are installed. Monobloc systems house all parts externally, whereas split systems divide components between inside and outside units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Choosing an air source heat pump can help improve energy efficiency while reducing your reliance on fossil fuels. They are designed to deliver consistent heating, lower running costs, and long-term performance.

Lower energy bills

Air source heat pumps are highly efficient, converting a small amount of electricity into a larger amount of heat. This improved efficiency can lead to reduced running costs over time.

Reduced carbon emissions

Air source heat pumps produce fewer carbon emissions than gas or oil heating systems. By using renewable energy from the air, they support a more sustainable way of heating your property.

Long lifespan and efficiency

Air source heat pumps are built for long-term performance and can operate efficiently for many years. With regular servicing, they can maintain high efficiency levels over time.

Reliable hot water supply

These systems are designed to deliver consistent hot water alongside heating. When paired with a suitable cylinder, they ensure hot water is available when you need it.

How Much Does an Air Source Heat Pump Cost in Swindon?

Average installation costs in Swindon

The cost of installing an air source heat pump typically ranges from £7,000 to £14,000 depending on the system and property. Available grants may help lower the overall installation cost.

What affects the price of a heat pump?

Heat pump installation costs can vary based on your property size, existing heating system, and overall efficiency. The need for system upgrades or additional components can affect the final installation cost.

Running costs and efficiency

Air source heat pumps are designed to be highly efficient, often producing more heat energy than the electricity they consume. Typical running costs can range from around £800 to £1,200 per year, depending on usage and energy tariffs.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Most air source heat pumps produce minimal noise during operation. Any noise generated is usually low and blends into the background.

02. Do you still need a boiler?

Air source heat pumps are often installed as a complete alternative to gas or oil boilers. In certain situations, a boiler may still be used to support heating when demand is higher.

Day to day heating and hot water use

Air source heat pumps are designed to run steadily throughout the day, maintaining a consistent and comfortable indoor temperature. A steady operation allows the system to work more efficiently and maintain even heat distribution.

The system heats water and stores it in a cylinder, so you have access to hot water throughout the day. It is designed to comfortably meet the hot water needs of most households.

Heat Pump Guarantees and Maintenance

Air source heat pumps offer dependable performance, supported by manufacturer warranties and ongoing maintenance. Ongoing servicing helps maintain efficiency and reduce the risk of issues.

Manufacturer warranties

Most air source heat pumps come with manufacturer warranties that cover key components for added peace of mind. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

Air source heat pumps are designed to operate for many years when properly maintained. Many units are expected to deliver performance for well over a decade.

Ongoing maintenance requirements

Routine maintenance is recommended to keep the system running smoothly. This may include inspections, cleaning components, and checking system pressure.

Recent Heat Pump Installations in Swindon

Heat pump installations have increased significantly in recent years, with more homeowners choosing low-carbon heating solutions. The increase reflects wider efforts to reduce carbon emissions and improve energy performance in homes.

Residential heat pump installations

Most heat pump installations take place in residential properties, with air source systems being the most commonly used. These systems can be fitted in a variety of homes and are typically installed within a short timeframe.

Swindon and South West projects

We’ve completed a range of recent air source heat pump installations across Swindon and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Swindon

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are designed to keep running costs down by using energy efficiently. Their efficiency means they can deliver more heat output for less energy input.

02. How long does installation take?

The installation process usually takes a few days, although this can vary based on the setup. The exact duration will depend on the size of the system and any additional requirements.

03.Are heat pumps suitable for my home?

Heat pumps can be installed in many property types, provided the system is designed correctly. A property assessment helps determine the best setup for your home.

04. What maintenance is required?

Regular checks are recommended to maintain performance and efficiency. Servicing usually involves inspecting key parts and ensuring everything is working correctly.