Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Shepton Mallet

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Shepton Mallet

We install in Shepton Mallet and the surrounding areas.

Boasting more than 20 years of industry experience, our team operates as a collaborative team, focused on achieving the best possible results for every customer. Our way of working is reflected in the reputation we’ve built. We take pride in delivering a five-star service, and your satisfaction remains at the heart of everything we do.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

Air source heat pumps are energy-efficient systems that capture heat from the outside air to supply heating and hot water. It offers a low-carbon alternative to traditional gas or oil heating systems.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. They are designed to operate efficiently all year round, including during colder weather.

Heating and hot water explained

It provides heating through radiators or underfloor systems, along with hot water storage. You can expect a reliable and consistent level of comfort across your property.

Efficient heating and cooling

Air source heat pumps are highly efficient, producing more energy than they consume. Depending on the system, cooling may also be available to help regulate indoor comfort in warmer weather.

Types of Air Source Heat Pumps

Different types of air source heat pumps are available depending on how your property is set up. Typical systems include air to water, air to air, and hybrid configurations.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. They can also provide cooling during warmer months, offering year-round climate control.

Hybrid air to water systems

Hybrid systems combine an air source heat pump with a traditional boiler to provide flexible heating. This setup helps maintain efficiency while ensuring consistent performance during colder periods.

Monobloc vs split systems

There are two main configurations: monobloc systems and split systems, each with different installation requirements. A monobloc system is contained within a single unit, while a split system separates key components between indoor and outdoor units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Choosing an air source heat pump can help improve energy efficiency while reducing your reliance on fossil fuels. They provide dependable heating alongside improved energy performance over time.

Lower energy bills

They operate at high efficiency levels, producing more heat energy than the electricity they consume. This improved efficiency can lead to reduced running costs over time.

Reduced carbon emissions

They help reduce the environmental impact of heating your home. They make use of renewable heat energy, helping to lower your carbon footprint.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. Ongoing maintenance helps ensure they continue to run efficiently year after year.

Reliable hot water supply

They can meet your household’s hot water demands efficiently. They work effectively with hot water cylinders to provide a consistent supply.

How Much Does an Air Source Heat Pump Cost in Shepton Mallet?

Average installation costs in Shepton Mallet

The cost of installing an air source heat pump typically ranges from £7,000 to £14,000 depending on the system and property. Available grants may help lower the overall installation cost.

What affects the price of a heat pump?

The final price of a heat pump installation depends on factors such as the size of your home, insulation levels, and system requirements. Any required upgrades to radiators, electrics, or hot water systems may increase the total cost.

Running costs and efficiency

These systems operate at high efficiency levels, delivering more heat output than the energy they use. Running costs vary, but are often estimated between £800 and £1,200 per year based on usage and tariff.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Modern air source heat pumps run at low noise levels, making them ideal for home use. The outdoor unit may produce a gentle hum, but this is typically unobtrusive.

02. Do you still need a boiler?

Air source heat pumps are often installed as a complete alternative to gas or oil boilers. Some homes may benefit from a hybrid setup that combines a heat pump with a boiler for additional support.

Day to day heating and hot water use

Air source heat pumps are designed to run steadily throughout the day, maintaining a consistent and comfortable indoor temperature. This approach helps improve efficiency and avoids sudden changes in temperature.

Hot water is produced and stored for use when required, providing a reliable supply. With the right setup, you can expect a consistent supply to meet daily household demand.

Heat Pump Guarantees and Maintenance

Air source heat pumps are designed for long-term reliability, with warranties and maintenance helping to protect your investment. Regular checks help ensure the system continues to operate as expected.

Manufacturer warranties

Warranties are usually included to cover major components and support long-term reliability. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

These systems have a long lifespan when installed and maintained correctly. Many units are expected to deliver performance for well over a decade.

Ongoing maintenance requirements

Air source heat pumps require regular servicing to maintain efficiency and performance. Servicing typically involves inspecting parts, cleaning key components, and ensuring everything is working correctly.

Recent Heat Pump Installations in Shepton Mallet

Heat pump adoption has grown steadily, driven by demand for more energy-efficient heating systems. Growing interest is being driven by available grants and the push for improved energy efficiency.

Residential heat pump installations

The majority of installations are carried out in homes, with air source heat pumps being the most popular option. They are suitable for a range of property types and can usually be installed within a few days.

Shepton Mallet and South West projects

We’ve completed a range of recent air source heat pump installations across Shepton Mallet and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Shepton Mallet

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Running costs are typically lower than traditional heating systems due to the efficiency of heat pumps. They produce more heat energy than the electricity they consume, helping to reduce overall energy use.

02. How long does installation take?

The installation process usually takes a few days, although this can vary based on the setup. Additional work or system upgrades can extend the installation timeframe.

03.Are heat pumps suitable for my home?

Heat pumps can be installed in many property types, provided the system is designed correctly. A property assessment helps determine the best setup for your home.

04. What maintenance is required?

Air source heat pumps require regular servicing to keep them running efficiently. Maintenance may include cleaning, system checks, and performance testing to keep everything running smoothly.