Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Oxford

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Oxford

We install in Oxford and the surrounding areas.

Boasting more than 20 years of industry experience, our team works as a close-knit group, focused on achieving the best possible results for every customer. Our way of working is reflected in the reputation we’ve built. We take pride in delivering a five-star service, and your satisfaction remains at the core of our service.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

Air source heat pumps are energy-efficient systems that capture heat from the outside air to supply heating and hot water. This makes it a more sustainable alternative to traditional gas or oil heating.

How air source heat pumps work

These systems extract heat from the outside air and move it indoors through a highly efficient process. The system remains efficient even in colder conditions.

Heating and hot water explained

The system distributes heat through radiators, underfloor heating, or a hot water cylinder. This ensures a steady and reliable supply of heating and hot water.

Efficient heating and cooling

They operate at high efficiency levels, making them a cost-effective heating solution. Some systems can also provide cooling during warmer months, helping to maintain a comfortable indoor temperature year-round.

Types of Air Source Heat Pumps

Air source heat pumps come in a range of system types designed to suit different homes and heating needs. Typical systems include air to water, air to air, and hybrid configurations.

Air to water heat pumps

Air to water systems deliver heat to your home through water-based systems such as radiators and underfloor heating. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

Air to air systems work by circulating warm air throughout the property. They are often used where both heating and cooling are required within the same system.

Hybrid air to water systems

Hybrid systems combine an air source heat pump with a traditional boiler to provide flexible heating. They can switch between energy sources depending on demand and efficiency, helping to optimise performance.

Monobloc vs split systems

These systems are generally installed as either monobloc or split units, depending on the property setup. Monobloc systems house all parts externally, whereas split systems divide components between inside and outside units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Air source heat pumps provide an efficient and environmentally conscious alternative to traditional heating systems. They provide dependable heating alongside improved energy performance over time.

Lower energy bills

They operate at high efficiency levels, producing more heat energy than the electricity they consume. This can help lower your energy bills compared to traditional heating systems.

Reduced carbon emissions

These systems offer a lower-carbon alternative to traditional fossil fuel heating. This makes them a more environmentally responsible choice for home heating.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. With regular servicing, they can maintain high efficiency levels over time.

Reliable hot water supply

These systems are designed to deliver consistent hot water alongside heating. With the right setup, they offer dependable access to hot water throughout the day.

How Much Does an Air Source Heat Pump Cost in Oxford?

Average installation costs in Oxford

The cost of installing an air source heat pump typically ranges from £7,000 to £14,000 depending on the system and property. In many cases, government incentives can reduce the amount you pay upfront.

What affects the price of a heat pump?

The final price of a heat pump installation depends on factors such as the size of your home, insulation levels, and system requirements. Any required upgrades to radiators, electrics, or hot water systems may increase the total cost.

Running costs and efficiency

Heat pumps work efficiently by converting electricity into a greater amount of usable heat. Annual running costs are generally between £800 and £1,200, depending on your home and energy usage.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Air source heat pumps are designed to operate quietly, making them suitable for residential areas. Any noise generated is usually low and blends into the background.

02. Do you still need a boiler?

Air source heat pumps are often installed as a complete alternative to gas or oil boilers. However, some properties may use a hybrid system alongside a boiler during colder periods.

Day to day heating and hot water use

Air source heat pumps work best when running continuously, helping to keep your home at a stable and comfortable temperature. This approach helps improve efficiency and avoids sudden changes in temperature.

The system heats water and stores it in a cylinder, so you have access to hot water throughout the day. This setup ensures a steady and dependable supply for everyday use.

Heat Pump Guarantees and Maintenance

These systems are built to last, with guarantees and regular servicing helping to ensure continued performance. Regular checks help ensure the system continues to operate as expected.

Manufacturer warranties

Most air source heat pumps come with manufacturer warranties that cover key components for added peace of mind. The length and level of cover can vary depending on the brand and system installed.

Expected system lifespan

Air source heat pumps are designed to operate for many years when properly maintained. Most systems can last between 15 and 20 years or more.

Ongoing maintenance requirements

Routine maintenance is recommended to keep the system running smoothly. This may include inspections, cleaning components, and checking system pressure.

Recent Heat Pump Installations in Oxford

Heat pump installations have increased significantly in recent years, with more homeowners choosing low-carbon heating solutions. Growing interest is being driven by available grants and the push for improved energy efficiency.

Residential heat pump installations

Most heat pump installations take place in residential properties, with air source systems being the most commonly used. They are suitable for a range of property types and can usually be installed within a few days.

Oxford and South West projects

We’ve completed a range of recent air source heat pump installations across Oxford and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Oxford

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Running costs are typically lower than traditional heating systems due to the efficiency of heat pumps. This efficiency helps lower overall heating costs compared to less efficient systems.

02. How long does installation take?

Most air source heat pump installations are completed within a few days, depending on the property and system requirements. Additional work or system upgrades can extend the installation timeframe.

03.Are heat pumps suitable for my home?

Most homes can benefit from an air source heat pump, particularly with good insulation. A detailed assessment ensures the system is tailored to your property’s needs.

04. What maintenance is required?

Regular checks are recommended to maintain performance and efficiency. This typically includes inspections, cleaning components, and checking system performance.