Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Cheltenham

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Cheltenham

We install in Cheltenham and the surrounding areas.

Backed by over two decades of combined expertise, our team works as a close-knit group, committed to delivering exceptional service standards. Our way of working is reflected in the reputation we’ve built. We are proud to provide a five-star experience, and your satisfaction remains at the core of our service.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is a low-carbon heating system that uses energy from the air outside to warm your home and provide hot water. This makes it a more sustainable alternative to traditional gas or oil heating.

How air source heat pumps work

These systems extract heat from the outside air and move it indoors through a highly efficient process. The system remains efficient even in colder conditions.

Heating and hot water explained

It provides heating through radiators or underfloor systems, along with hot water storage. This ensures a steady and reliable supply of heating and hot water.

Efficient heating and cooling

They operate at high efficiency levels, making them a cost-effective heating solution. Depending on the system, cooling may also be available to help regulate indoor comfort in warmer weather.

Types of Air Source Heat Pumps

Different types of air source heat pumps are available depending on how your property is set up. The most common options include air to water, air to air, and hybrid systems.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. This makes them a popular choice for properties upgrading from gas or oil heating systems.

Air to air heat pumps

Air to air systems work by circulating warm air throughout the property. In addition to heating, they can offer cooling, making them a versatile solution.

Hybrid air to water systems

These systems integrate a heat pump with an existing boiler for a balanced approach to heating. This setup helps maintain efficiency while ensuring consistent performance during colder periods.

Monobloc vs split systems

These systems are generally installed as either monobloc or split units, depending on the property setup. Monobloc units contain all components in one outdoor unit, while split systems separate indoor and outdoor elements.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Air source heat pumps provide an efficient and environmentally conscious alternative to traditional heating systems. They are designed to deliver consistent heating, lower running costs, and long-term performance.

Lower energy bills

These systems use electricity efficiently to generate heat, helping to reduce overall energy use. This improved efficiency can lead to reduced running costs over time.

Reduced carbon emissions

They help reduce the environmental impact of heating your home. This makes them a more environmentally responsible choice for home heating.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. They are designed to deliver consistent efficiency across their lifespan.

Reliable hot water supply

These systems are designed to deliver consistent hot water alongside heating. With the right setup, they offer dependable access to hot water throughout the day.

How Much Does an Air Source Heat Pump Cost in Cheltenham?

Average installation costs in Cheltenham

Most air source heat pump installations fall between £7,000 and £14,000, depending on the size and complexity of the system. Available grants may help lower the overall installation cost.

What affects the price of a heat pump?

The final price of a heat pump installation depends on factors such as the size of your home, insulation levels, and system requirements. The need for system upgrades or additional components can affect the final installation cost.

Running costs and efficiency

These systems operate at high efficiency levels, delivering more heat output than the energy they use. Running costs vary, but are often estimated between £800 and £1,200 per year based on usage and tariff.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Air source heat pumps are designed to operate quietly, making them suitable for residential areas. Any noise generated is usually low and blends into the background.

02. Do you still need a boiler?

A heat pump can typically take over the role of your existing boiler. However, some properties may use a hybrid system alongside a boiler during colder periods.

Day to day heating and hot water use

Air source heat pumps are designed to run steadily throughout the day, maintaining a consistent and comfortable indoor temperature. By running consistently, they deliver more efficient performance and improved comfort levels.

The system heats water and stores it in a cylinder, so you have access to hot water throughout the day. With the right setup, you can expect a consistent supply to meet daily household demand.

Heat Pump Guarantees and Maintenance

These systems are built to last, with guarantees and regular servicing helping to ensure continued performance. Regular checks help ensure the system continues to operate as expected.

Manufacturer warranties

Most air source heat pumps come with manufacturer warranties that cover key components for added peace of mind. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

These systems have a long lifespan when installed and maintained correctly. It is common for systems to operate efficiently for 15 to 20 years or longer.

Ongoing maintenance requirements

Routine maintenance is recommended to keep the system running smoothly. This may include inspections, cleaning components, and checking system pressure.

Recent Heat Pump Installations in Cheltenham

There has been a noticeable rise in heat pump installations as more properties move towards low-carbon heating. This shift is supported by government incentives and a greater focus on reducing energy use.

Residential heat pump installations

The majority of installations are carried out in homes, with air source heat pumps being the most popular option. These systems can be fitted in a variety of homes and are typically installed within a short timeframe.

Cheltenham and South West projects

We’ve completed a range of recent air source heat pump installations across Cheltenham and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Cheltenham

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are generally not expensive to run, thanks to their high efficiency. This efficiency helps lower overall heating costs compared to less efficient systems.

02. How long does installation take?

Installation typically takes between two to five days, depending on the complexity of the project. The exact duration will depend on the size of the system and any additional requirements.

03.Are heat pumps suitable for my home?

Air source heat pumps are suitable for a wide range of properties, including both new builds and existing homes. A property assessment helps determine the best setup for your home.

04. What maintenance is required?

Air source heat pumps require regular servicing to keep them running efficiently. Servicing usually involves inspecting key parts and ensuring everything is working correctly.