Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Tiverton

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Tiverton

We install in Tiverton and the surrounding areas.

With over 20 years of combined experience in the industry, our team functions as a well-coordinated unit, committed to delivering exceptional service standards. Our way of working is reflected in the reputation we’ve built. We take pride in delivering a five-star service, and your satisfaction remains at the core of our service.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is an energy-efficient system that extracts heat from the outside air to heat your home and hot water. They provide a cleaner, more efficient alternative to conventional heating systems.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. This process works effectively even in lower outdoor temperatures.

Heating and hot water explained

Heat is delivered throughout your home via radiators, underfloor heating, or stored in a hot water cylinder. This ensures a steady and reliable supply of heating and hot water.

Efficient heating and cooling

They operate at high efficiency levels, making them a cost-effective heating solution. Certain models can offer cooling as well as heating, giving you greater control over indoor temperatures.

Types of Air Source Heat Pumps

Air source heat pumps come in a range of system types designed to suit different homes and heating needs. Typical systems include air to water, air to air, and hybrid configurations.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. This makes them a popular choice for properties upgrading from gas or oil heating systems.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. They are often used where both heating and cooling are required within the same system.

Hybrid air to water systems

These systems integrate a heat pump with an existing boiler for a balanced approach to heating. This setup helps maintain efficiency while ensuring consistent performance during colder periods.

Monobloc vs split systems

Air source heat pumps are typically available as monobloc or split systems, depending on how the components are installed. Monobloc units contain all components in one outdoor unit, while split systems separate indoor and outdoor elements.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Choosing an air source heat pump can help improve energy efficiency while reducing your reliance on fossil fuels. They offer a reliable solution for heating and hot water with long-term benefits.

Lower energy bills

These systems use electricity efficiently to generate heat, helping to reduce overall energy use. This can help lower your energy bills compared to traditional heating systems.

Reduced carbon emissions

Air source heat pumps produce fewer carbon emissions than gas or oil heating systems. By using renewable energy from the air, they support a more sustainable way of heating your property.

Long lifespan and efficiency

They offer durable, long-lasting performance when properly maintained. They are designed to deliver consistent efficiency across their lifespan.

Reliable hot water supply

They can meet your household’s hot water demands efficiently. They work effectively with hot water cylinders to provide a consistent supply.

How Much Does an Air Source Heat Pump Cost in Tiverton?

Average installation costs in Tiverton

Typical installation costs range from £7,000 to £14,000, depending on your home and system requirements. In many cases, government incentives can reduce the amount you pay upfront.

What affects the price of a heat pump?

Heat pump installation costs can vary based on your property size, existing heating system, and overall efficiency. Any required upgrades to radiators, electrics, or hot water systems may increase the total cost.

Running costs and efficiency

Heat pumps work efficiently by converting electricity into a greater amount of usable heat. Typical running costs can range from around £800 to £1,200 per year, depending on usage and energy tariffs.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Modern air source heat pumps run at low noise levels, making them ideal for home use. You may notice a low, consistent sound from the external unit, but it is not disruptive.

02. Do you still need a boiler?

Air source heat pumps are often installed as a complete alternative to gas or oil boilers. However, some properties may use a hybrid system alongside a boiler during colder periods.

Day to day heating and hot water use

Air source heat pumps work best when running continuously, helping to keep your home at a stable and comfortable temperature. By running consistently, they deliver more efficient performance and improved comfort levels.

Hot water is produced and stored for use when required, providing a reliable supply. It is designed to comfortably meet the hot water needs of most households.

Heat Pump Guarantees and Maintenance

Air source heat pumps offer dependable performance, supported by manufacturer warranties and ongoing maintenance. Ongoing servicing helps maintain efficiency and reduce the risk of issues.

Manufacturer warranties

Warranties are usually included to cover major components and support long-term reliability. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

With the right care, air source heat pumps can provide reliable performance over the long term. Most systems can last between 15 and 20 years or more.

Ongoing maintenance requirements

Air source heat pumps require regular servicing to maintain efficiency and performance. Servicing typically involves inspecting parts, cleaning key components, and ensuring everything is working correctly.

Recent Heat Pump Installations in Tiverton

There has been a noticeable rise in heat pump installations as more properties move towards low-carbon heating. Growing interest is being driven by available grants and the push for improved energy efficiency.

Residential heat pump installations

The majority of installations are carried out in homes, with air source heat pumps being the most popular option. They are designed to suit different property types and can often be installed with minimal disruption.

Tiverton and South West projects

We’ve completed a range of recent air source heat pump installations across Tiverton and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Tiverton

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are generally not expensive to run, thanks to their high efficiency. They produce more heat energy than the electricity they consume, helping to reduce overall energy use.

02. How long does installation take?

Installation typically takes between two to five days, depending on the complexity of the project. Larger or more complex installations may take slightly longer to complete.

03.Are heat pumps suitable for my home?

Heat pumps can be installed in many property types, provided the system is designed correctly. An initial survey will confirm whether your home is suitable and what system is required.

04. What maintenance is required?

Air source heat pumps require regular servicing to keep them running efficiently. Maintenance may include cleaning, system checks, and performance testing to keep everything running smoothly.