Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Glastonbury

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Glastonbury

We install in Glastonbury and the surrounding areas.

With over 20 years of combined experience in the industry, our team operates as a collaborative team, focused on achieving the best possible results for every customer. This approach has helped shape our strong reputation. We take pride in delivering a five-star service, and your satisfaction remains at the heart of everything we do.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is an energy-efficient system that extracts heat from the outside air to heat your home and hot water. It offers a low-carbon alternative to traditional gas or oil heating systems.

How air source heat pumps work

These systems extract heat from the outside air and move it indoors through a highly efficient process. This process works effectively even in lower outdoor temperatures.

Heating and hot water explained

The system distributes heat through radiators, underfloor heating, or a hot water cylinder. It provides a consistent supply of heating and hot water throughout your home.

Efficient heating and cooling

Air source heat pumps are highly efficient, producing more energy than they consume. Certain models can offer cooling as well as heating, giving you greater control over indoor temperatures.

Types of Air Source Heat Pumps

Different types of air source heat pumps are available depending on how your property is set up. These include air to water systems, air to air units, and hybrid solutions.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. They can also provide cooling during warmer months, offering year-round climate control.

Hybrid air to water systems

These systems integrate a heat pump with an existing boiler for a balanced approach to heating. They can switch between energy sources depending on demand and efficiency, helping to optimise performance.

Monobloc vs split systems

Air source heat pumps are typically available as monobloc or split systems, depending on how the components are installed. Monobloc systems house all parts externally, whereas split systems divide components between inside and outside units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Air source heat pumps provide an efficient and environmentally conscious alternative to traditional heating systems. They provide dependable heating alongside improved energy performance over time.

Lower energy bills

These systems use electricity efficiently to generate heat, helping to reduce overall energy use. This can help lower your energy bills compared to traditional heating systems.

Reduced carbon emissions

These systems offer a lower-carbon alternative to traditional fossil fuel heating. They make use of renewable heat energy, helping to lower your carbon footprint.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. Ongoing maintenance helps ensure they continue to run efficiently year after year.

Reliable hot water supply

Air source heat pumps provide a steady and reliable supply of hot water for your home. With the right setup, they offer dependable access to hot water throughout the day.

How Much Does an Air Source Heat Pump Cost in Glastonbury?

Average installation costs in Glastonbury

Typical installation costs range from £7,000 to £14,000, depending on your home and system requirements. In many cases, government incentives can reduce the amount you pay upfront.

What affects the price of a heat pump?

The final price of a heat pump installation depends on factors such as the size of your home, insulation levels, and system requirements. Additional work such as upgrading radiators, pipework, or hot water cylinders can also impact the overall price.

Running costs and efficiency

Heat pumps work efficiently by converting electricity into a greater amount of usable heat. Typical running costs can range from around £800 to £1,200 per year, depending on usage and energy tariffs.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Modern air source heat pumps run at low noise levels, making them ideal for home use. The outdoor unit may produce a gentle hum, but this is typically unobtrusive.

02. Do you still need a boiler?

In most cases, an air source heat pump can fully replace a traditional boiler. In certain situations, a boiler may still be used to support heating when demand is higher.

Day to day heating and hot water use

Air source heat pumps are designed to run steadily throughout the day, maintaining a consistent and comfortable indoor temperature. By running consistently, they deliver more efficient performance and improved comfort levels.

Hot water is produced and stored for use when required, providing a reliable supply. This setup ensures a steady and dependable supply for everyday use.

Heat Pump Guarantees and Maintenance

Air source heat pumps offer dependable performance, supported by manufacturer warranties and ongoing maintenance. Regular checks help ensure the system continues to operate as expected.

Manufacturer warranties

Warranties are usually included to cover major components and support long-term reliability. Cover will vary depending on the product and manufacturer requirements.

Expected system lifespan

Air source heat pumps are designed to operate for many years when properly maintained. Many units are expected to deliver performance for well over a decade.

Ongoing maintenance requirements

Routine maintenance is recommended to keep the system running smoothly. Maintenance usually includes system checks, cleaning, and performance testing.

Recent Heat Pump Installations in Glastonbury

Heat pump installations have increased significantly in recent years, with more homeowners choosing low-carbon heating solutions. The increase reflects wider efforts to reduce carbon emissions and improve energy performance in homes.

Residential heat pump installations

The majority of installations are carried out in homes, with air source heat pumps being the most popular option. They are suitable for a range of property types and can usually be installed within a few days.

Glastonbury and South West projects

We’ve completed a range of recent air source heat pump installations across Glastonbury and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Glastonbury

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are designed to keep running costs down by using energy efficiently. They produce more heat energy than the electricity they consume, helping to reduce overall energy use.

02. How long does installation take?

The installation process usually takes a few days, although this can vary based on the setup. Additional work or system upgrades can extend the installation timeframe.

03.Are heat pumps suitable for my home?

Heat pumps can be installed in many property types, provided the system is designed correctly. A property assessment helps determine the best setup for your home.

04. What maintenance is required?

Regular checks are recommended to maintain performance and efficiency. Maintenance may include cleaning, system checks, and performance testing to keep everything running smoothly.