Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Burnham

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Burnham

We install in Burnham and the surrounding areas.

Boasting more than 20 years of industry experience, our team functions as a well-coordinated unit, focused on achieving the best possible results for every customer. This approach has helped shape our strong reputation. We take pride in delivering a five-star service, and your satisfaction remains at the heart of everything we do.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is an energy-efficient system that extracts heat from the outside air to heat your home and hot water. They provide a cleaner, more efficient alternative to conventional heating systems.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. The system remains efficient even in colder conditions.

Heating and hot water explained

It provides heating through radiators or underfloor systems, along with hot water storage. It provides a consistent supply of heating and hot water throughout your home.

Efficient heating and cooling

They operate at high efficiency levels, making them a cost-effective heating solution. Some systems can also provide cooling during warmer months, helping to maintain a comfortable indoor temperature year-round.

Types of Air Source Heat Pumps

Different types of air source heat pumps are available depending on how your property is set up. The most common options include air to water, air to air, and hybrid systems.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. They are well suited to homes aiming to improve energy efficiency and reduce carbon emissions.

Air to air heat pumps

Air to air systems work by circulating warm air throughout the property. In addition to heating, they can offer cooling, making them a versatile solution.

Hybrid air to water systems

A hybrid air to water system works alongside a boiler to deliver efficient and reliable heating. They can switch between energy sources depending on demand and efficiency, helping to optimise performance.

Monobloc vs split systems

These systems are generally installed as either monobloc or split units, depending on the property setup. A monobloc system is contained within a single unit, while a split system separates key components between indoor and outdoor units.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Installing an air source heat pump offers a more energy-efficient and low-carbon way to heat your home. They provide dependable heating alongside improved energy performance over time.

Lower energy bills

They operate at high efficiency levels, producing more heat energy than the electricity they consume. As a result, they can help reduce your overall heating expenses.

Reduced carbon emissions

Air source heat pumps produce fewer carbon emissions than gas or oil heating systems. They make use of renewable heat energy, helping to lower your carbon footprint.

Long lifespan and efficiency

These systems are designed to provide reliable performance with a long operational lifespan. With regular servicing, they can maintain high efficiency levels over time.

Reliable hot water supply

They can meet your household’s hot water demands efficiently. They work effectively with hot water cylinders to provide a consistent supply.

How Much Does an Air Source Heat Pump Cost in Burnham?

Average installation costs in Burnham

The cost of installing an air source heat pump typically ranges from £7,000 to £14,000 depending on the system and property. In many cases, government incentives can reduce the amount you pay upfront.

What affects the price of a heat pump?

The final price of a heat pump installation depends on factors such as the size of your home, insulation levels, and system requirements. The need for system upgrades or additional components can affect the final installation cost.

Running costs and efficiency

Air source heat pumps are designed to be highly efficient, often producing more heat energy than the electricity they consume. Typical running costs can range from around £800 to £1,200 per year, depending on usage and energy tariffs.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Modern air source heat pumps run at low noise levels, making them ideal for home use. The outdoor unit may produce a gentle hum, but this is typically unobtrusive.

02. Do you still need a boiler?

In most cases, an air source heat pump can fully replace a traditional boiler. In certain situations, a boiler may still be used to support heating when demand is higher.

Day to day heating and hot water use

Air source heat pumps work best when running continuously, helping to keep your home at a stable and comfortable temperature. By running consistently, they deliver more efficient performance and improved comfort levels.

Hot water is typically stored in a cylinder, ensuring it is readily available when needed. This setup ensures a steady and dependable supply for everyday use.

Heat Pump Guarantees and Maintenance

These systems are built to last, with guarantees and regular servicing helping to ensure continued performance. Routine maintenance plays an important role in keeping the system running efficiently over time.

Manufacturer warranties

Manufacturers typically provide warranties to protect essential parts of the system. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

These systems have a long lifespan when installed and maintained correctly. Most systems can last between 15 and 20 years or more.

Ongoing maintenance requirements

Air source heat pumps require regular servicing to maintain efficiency and performance. Servicing typically involves inspecting parts, cleaning key components, and ensuring everything is working correctly.

Recent Heat Pump Installations in Burnham

Heat pump adoption has grown steadily, driven by demand for more energy-efficient heating systems. The increase reflects wider efforts to reduce carbon emissions and improve energy performance in homes.

Residential heat pump installations

The majority of installations are carried out in homes, with air source heat pumps being the most popular option. These systems can be fitted in a variety of homes and are typically installed within a short timeframe.

Burnham and South West projects

We’ve completed a range of recent air source heat pump installations across Burnham and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Burnham

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Air source heat pumps are designed to keep running costs down by using energy efficiently. They produce more heat energy than the electricity they consume, helping to reduce overall energy use.

02. How long does installation take?

The installation process usually takes a few days, although this can vary based on the setup. The exact duration will depend on the size of the system and any additional requirements.

03.Are heat pumps suitable for my home?

Heat pumps can be installed in many property types, provided the system is designed correctly. A property assessment helps determine the best setup for your home.

04. What maintenance is required?

Air source heat pumps require regular servicing to keep them running efficiently. Maintenance may include cleaning, system checks, and performance testing to keep everything running smoothly.