Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

Do I need a boiler if I have an Air Source Heat Pump?

With an Air Source Heat Pump, you won’t need or want a traditional boiler. It’s true that Air Source Heat Pumps are often referred to as “Low Temperature” systems, but that’s when compared to boilers that typically operate at higher temperatures, around 65-70 degrees Celsius. However, it’s important to note that water at 50-55 degrees Celsius is still hot and perfectly suitable for domestic use in a dwelling. If you’re interested in receiving the Government BUS Voucher, it’s necessary to replace your fossil fuel boiler with an Air Source Heat Pump.

What are the benefits of Air Source Heat Pump installations?

Benefits include reduced energy bills, lower carbon emissions, and eligibility for government incentives.

How long does an Air Source Heat Pump installation take?

An Air Source Heat Pump installation usually takes 3 to 7 days, depending on the system size and site conditions.

What maintenance do Air Source Heat Pumps require?

Air Source Heat Pump require regular servicing, including cleaning filters and checking refrigerant levels, to ensure optimal performance.

Is an Air Source Heat Pump expensive to run?

A properly sized and correctly installed Air Source Heat Pump is incredibly cost-effective to run. In fact, it stands out as the most economical heating system when compared to other electric or fossil fuel alternatives. A well-installed Air Source system can generate approximately 4kWh of heat for every 1kWh of electricity it consumes. By dividing the cost of 1kWh of electricity by 4, you can calculate the running cost of the system. Here’s an interesting fact that often goes unnoticed: 100% of the heat energy produced by the Heat Pump is delivered to your property, whereas traditional boilers can lose up to 20% of their heat energy through the flue with the exhaust gases.

How many Solar Panels do I need?

The number of panels needed varies from person to person and property to property. It primarily depends on the size of the area you have available, such as your roof space. Another crucial factor is how much energy you use and when you need it. It’s not as straightforward as saying, “I use 10,000 kWh per year, so just fit a system to meet that.” Keep in mind that panels generate less energy during winter, which might coincide with when you use the most energy. To determine your requirements accurately, take a closer look at your appliances and when you use them. Do you have additional electricity-intensive devices like an electric car or hot tub? Building your solar system around your specific energy needs and considering your lifestyle adjustments can help you maximize the benefits of Solar PV.

How does home battery storage installation work?

Home battery storage installation involves integrating a battery system with your existing energy setup, allowing you to store excess energy for use during peak times.

Air Source Heat Pump Installers in Bridgwater

Q: Are Heat Pumps noisy?

A properly installed Air Source Heat Pump operates incredibly quietly, almost like a gentle whisper. In fact, they are usually quieter than the flues of gas or oil boilers. The noise level generated by a heat pump is carefully regulated and covered by building regulations. As part of the Heat Loss Survey, a report should be produced to ensure that the heat pump meets the sound regulations and operates within acceptable noise limits. This ensures a peaceful and undisturbed environment for your home.

get a quote

About Air Source Heat Pumps

We install Air Source Heat Pumps in Bridgwater

We install in Bridgwater and the surrounding areas.

Boasting more than 20 years of industry experience, our team functions as a well-coordinated unit, committed to delivering exceptional service standards. This approach has helped shape our strong reputation. We take pride in delivering a five-star service, and your satisfaction remains at the core of our service.

Get a heat pump quote

modern solution for heating homes

What Is an Air Source Heat Pump?

An air source heat pump is a low-carbon heating system that uses energy from the air outside to warm your home and provide hot water. They provide a cleaner, more efficient alternative to conventional heating systems.

How air source heat pumps work

Air source heat pumps absorb heat from the air and transfer it into your home using a refrigeration cycle. They are designed to operate efficiently all year round, including during colder weather.

Heating and hot water explained

It provides heating through radiators or underfloor systems, along with hot water storage. It provides a consistent supply of heating and hot water throughout your home.

Efficient heating and cooling

Air source heat pumps are highly efficient, producing more energy than they consume. Certain models can offer cooling as well as heating, giving you greater control over indoor temperatures.

Types of Air Source Heat Pumps

Air source heat pumps come in a range of system types designed to suit different homes and heating needs. Typical systems include air to water, air to air, and hybrid configurations.

Air to water heat pumps

Air to water heat pumps transfer heat into a wet central heating system, supplying radiators, underfloor heating, and hot water. They are commonly used in homes looking to replace traditional boilers with a low-carbon alternative.

Air to air heat pumps

These systems deliver warm air into your home using indoor units, rather than water-based heating. They are often used where both heating and cooling are required within the same system.

Hybrid air to water systems

Hybrid systems combine an air source heat pump with a traditional boiler to provide flexible heating. The system automatically selects the most efficient heat source based on demand and conditions.

Monobloc vs split systems

These systems are generally installed as either monobloc or split units, depending on the property setup. Monobloc units contain all components in one outdoor unit, while split systems separate indoor and outdoor elements.

Air Source Heat Pumps

Benefits of Installing an Air Source Heat Pump

Installing an air source heat pump offers a more energy-efficient and low-carbon way to heat your home. They are designed to deliver consistent heating, lower running costs, and long-term performance.

Lower energy bills

Air source heat pumps are highly efficient, converting a small amount of electricity into a larger amount of heat. As a result, they can help reduce your overall heating expenses.

Reduced carbon emissions

They help reduce the environmental impact of heating your home. This makes them a more environmentally responsible choice for home heating.

Long lifespan and efficiency

Air source heat pumps are built for long-term performance and can operate efficiently for many years. With regular servicing, they can maintain high efficiency levels over time.

Reliable hot water supply

They can meet your household’s hot water demands efficiently. They work effectively with hot water cylinders to provide a consistent supply.

How Much Does an Air Source Heat Pump Cost in Bridgwater?

Average installation costs in Bridgwater

Most air source heat pump installations fall between £7,000 and £14,000, depending on the size and complexity of the system. Available grants may help lower the overall installation cost.

What affects the price of a heat pump?

Several factors influence the cost of installing a heat pump, including property size, insulation, and system design. Additional work such as upgrading radiators, pipework, or hot water cylinders can also impact the overall price.

Running costs and efficiency

These systems operate at high efficiency levels, delivering more heat output than the energy they use. Running costs vary, but are often estimated between £800 and £1,200 per year based on usage and tariff.

Your Heat Pump Installation Journey

1

Initial assessment and quotation

We carry out a detailed assessment of your property to provide an accurate and tailored quotation.

2

System design and planning

Our team designs a system suited to your home, ensuring optimal performance and efficiency.

3

Choosing an installation date

We work with you to arrange an installation date that fits around your schedule.

4

Installation day

Our engineers complete the installation efficiently, with minimal disruption to your home.

5

Handover and aftercare

Once installed, we guide you through the system and provide ongoing support to keep it running smoothly.

Living With an Air Source Heat Pump

01. Are heat pumps noisy?

Most air source heat pumps produce minimal noise during operation. The outdoor unit may produce a gentle hum, but this is typically unobtrusive.

02. Do you still need a boiler?

Air source heat pumps are often installed as a complete alternative to gas or oil boilers. Some homes may benefit from a hybrid setup that combines a heat pump with a boiler for additional support.

Day to day heating and hot water use

Air source heat pumps are designed to run steadily throughout the day, maintaining a consistent and comfortable indoor temperature. By running consistently, they deliver more efficient performance and improved comfort levels.

Hot water is typically stored in a cylinder, ensuring it is readily available when needed. This setup ensures a steady and dependable supply for everyday use.

Heat Pump Guarantees and Maintenance

Air source heat pumps offer dependable performance, supported by manufacturer warranties and ongoing maintenance. Routine maintenance plays an important role in keeping the system running efficiently over time.

Manufacturer warranties

Warranties are usually included to cover major components and support long-term reliability. Warranty terms can differ based on the manufacturer and specific system.

Expected system lifespan

With the right care, air source heat pumps can provide reliable performance over the long term. Many units are expected to deliver performance for well over a decade.

Ongoing maintenance requirements

Air source heat pumps require regular servicing to maintain efficiency and performance. Maintenance usually includes system checks, cleaning, and performance testing.

Recent Heat Pump Installations in Bridgwater

Heat pump installations have increased significantly in recent years, with more homeowners choosing low-carbon heating solutions. The increase reflects wider efforts to reduce carbon emissions and improve energy performance in homes.

Residential heat pump installations

Most heat pump installations take place in residential properties, with air source systems being the most commonly used. They are suitable for a range of property types and can usually be installed within a few days.

Bridgwater and South West projects

We’ve completed a range of recent air source heat pump installations across Bridgwater and the South West, showcasing our work across different property types. Take a look at some of our latest projects below.

Why Choose Us as Your Heat Pump Installer in Bridgwater

1

Accredited and experienced installers

Our team is fully accredited and brings extensive hands-on experience to every installation.

2

Detailed and comprehensive install approach

We follow a thorough, end-to-end installation process to ensure your system is designed and fitted correctly.

3

Trusted local service

We provide a reliable, locally focused service built on consistency and professional standards.

Common Queries

Frequently Asked Questions

01. Are air source heat pumps expensive to run?

Running costs are typically lower than traditional heating systems due to the efficiency of heat pumps. This efficiency helps lower overall heating costs compared to less efficient systems.

02. How long does installation take?

Installation typically takes between two to five days, depending on the complexity of the project. Larger or more complex installations may take slightly longer to complete.

03.Are heat pumps suitable for my home?

Most homes can benefit from an air source heat pump, particularly with good insulation. A detailed assessment ensures the system is tailored to your property’s needs.

04. What maintenance is required?

Air source heat pumps require regular servicing to keep them running efficiently. Maintenance may include cleaning, system checks, and performance testing to keep everything running smoothly.